...
| Dimensions without connection cable | Diameter x Lenght: Ø 27 x 56 mm Drilling diameter: Ø 22,5 mm Thread: Ø 22 mm x 49,5 mm |
| Weight without connection cable | 25 g |
| Casing | Transparent, protection IP 54 |
| Attachment | Screw connection with nut Ø 22 mm |
| Temperature range | -10 up to +65 °C |
| Working relay | potential-free electronic switch max. Operating current: 200 mA max. Nominal battery voltage: 24 V DC |
| Length of connection cable | 25 cm |
| Switch on -and off | Via user transponder, display with LEDs |
| Power supply | Nominal battery voltage: 12 - 24 V DC |
| Power consumption / performance | < 100 mA < 2 W |
| Programming of user data | via serial infrared(IR)-interface |
| Programming cable | Length approx. 1,5m Type: Mobile Easykey |
| Type: Mobile Easykey | Length approx. 1,5m |
| Response range of the transponder | Up to ca. 20 mm |
| Data receipt | Battery-backed (5 years battery life) |
| Certificate | CE |
Troubleshooting
Mobile Easykey Support: khd@mobileeasykey.de
Measure the voltage supply
At the brown plug of the smart lock measure with thin measuring tips between the black and brown cable. There
must be at least 12 V DC.
Check relay contact
At the brown plug of the smart lock measure with thin measuring tips between the orange and yellow cable. After
switching on via the transponder, the potential must be switched over.
Domnick+Müller GmbH+Co. KG Max-Planck-Straße 11 D-61381 Friedrichsdorf | BESTELLUNG SUPPORT HOMEPAGE |
|---|
...